Hello,
I have my FT8 software set up, and am using an external E-MU 0202
soundcard. On the KX3, I am using DATA A, with soundcard output going to the
KX3 mic input. I have made a couple FT8 contacts. But the ALC setting
remains puzzling to me. I have read Don Wilhelm's setup notes for the
digital modes, but what I am seeing does not agree with the notes. I am
unable to see any ALC bars. I set power on zero, and essentially set the
audio input to what sounds good (MIC Gain midscale), then up the power to 10
watts.
If I try to change to the USB mode, the FT8 software switches the KX3
back to DATA when I click the FT8 Tune button. That may be fine, but no
matter what I do or how I set the audio input, I don't ever see any bars on
the ALC meter.
Must be something simple I am overlooking?
--Ed--
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
