Jan,
If you have the KPA100 and have operated it for more than 5 hours at
greater than 50 watts, then the answer is YES, take the KPA100 off the
base K2, remove the shield and tighten the PA mounting screws. a 1/8
turn is normally all that it takes.
73,
Don W3FPR
On 10/28/2017 9:19 PM, Jan wrote:
Having assembled the K2 kit in 1999 ~ over a period of some 6 weeks ~ do
you suppose I should recheck the hardware now?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
