James,
Am not sure why you need a tuner between the radio and the amp in the first
place?? As of now, I have my K3S or K3 driving a Alpha 9500. I never have
used the tuner in either when driving the amp? I assume the KPA9500 will have
a 52 ohm input, and you would not need a tuner.
Dick, K8ZTT
From: James Wilson <[email protected]>
To: Elecraft <[email protected]>
Sent: Thursday, November 2, 2017 11:54 AM
Subject: [Elecraft] KPA1500 with P3 Transmit Monitor
Looking at a draft of the KPA1500 amplifier, it appears
that the only place to install a TxMon or Wattmeter coupler
is at the - output - of the built-in tuner.
At that point, it will always show the SWR of the
coax feedline, not the SWR that the amplifier "sees" as
adjusted by the built-in tuner.
Or, is there a coupler built-in inside the KPA1500 ?
What am I missing?
Jim - W4RKS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
