Must be some magic going on in the AH-4. It specifies “Tuning power required: 5-15 watts”. Would be interesting to know where the other 14.7 watts is going. I’m pretty sure the KAT-500 doesn’t have anything like that.
The other thing you can do with the KAT-500 is specify when a tune sequence is initiated. I set mine for 1.9:1. If the SWR is less than that nothing happens. Allows for some variance in the antennas due to weather conditions. You can still initiate a tune if you want to manually, but it won’t do it on its own. The amps are happy below that so no reason to tune. Ken K6MR ________________________________ From: E T <[email protected]> Sent: Monday, November 6, 2017 5:28:16 PM To: Ken K6MR Cc: [email protected] Subject: Re: [Elecraft] KAT500 actual radiated power during tuning I know the training process, have done it many times on all my tuners, the KX3 and KX2 built-in, KXPA100, also an MFJ-993B and KAT500. And no, I currently do not have the K3 and the cables to transmit band switching. But even after training I find that all of these will occasionally perform a full tuning cycle even when close to a programmed frequency. So of course given that my antenna is stable I *shouldn’t* need to do a full tune yet there it is. The tuner behavior is out of my control if it decides to perform a full cycle when I press the tune button after a band or range switch. My point is that the AH-4 specs say: - 0.3 W RADIATED POWER - Radiated power during tuning is less than 0.3 W, minimizing interference to other stations. I’m just asking if the KAT500 has similar capabilities. Erik W1QED On Nov 6, 2017, at 8:08 PM, Ken K6MR <[email protected]<mailto:[email protected]>> wrote: Assuming your antennas are stable, you should only need to go through the tune process once. The KAT500 will remember the proper settings for each frequency segment (see the manual for the size of the segments on each band) and will instantly return to those values at the first hint of rf. So spend some time training the tuner on each band and you don’t have to worry about interference. Once it is trained you can just find a frequency and start transmitting. No tune cycle required. I note you don’t have a K3, but if you did the tuner would automagically follow the transceiver and switch values without any rf at all. Ken K6MR ________________________________ From: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> on behalf of E T <[email protected]<mailto:[email protected]>> Sent: Monday, November 6, 2017 4:52:17 PM To: Fred Jensen Cc: [email protected]<mailto:[email protected]> Subject: Re: [Elecraft] KAT500 actual radiated power during tuning I can get and hook up a power meter, still looking for a definitive answer maybe from Wayne and Eric. If it puts out the full tuning power that is going into it (e.g. 10-20W) then I want to shift away from any signals I’m trying to tune to (rude to step on conversations), but if it’s using a low power like a RigExpert that would most likely not interfere then you get better accuracy… Erik W1QED > On Nov 6, 2017, at 7:26 PM, Fred Jensen > <[email protected]<mailto:[email protected]>> wrote: > > My KAT500 [when I still had it] put out variable power levels while it was > tuning. When it was tuned, it put out the TUNE power [25 W] into the > antenna. More than once, someone called QRZ? after tuning in a clear spot. > They probably saw my little signal on a fairly dead band on a panadapter. Is > that what you were asking for? > > 73, > > Fred ["Skip"] K6DGW > Sparks NV DM09dn > Washoe County > > On 11/6/2017 3:37 PM, E T wrote: >> I understand the requirements, and the ICOM IC-7300 puts out 12.5W by >> default (can be adjusted via service menus). I'm looking for a definitive >> answer as to the actual radiated power. Like I said, the ICOM AH-4 tuner >> specifies its actual radiated antenna power but the KAT500 does not so >> that's why I'm asking. >> >> Thanks and 73, >> Erik Tkal - W1QED >> > > ______________________________________________________________ > Elecraft mailing list > Home: > https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraft&data=02%7C01%7Ck6mr%40outlook.com%7C49b106ac706446bfa01808d52579ef47%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636456127982919553&sdata=c7JjUZZ1siUZcYfzi0vToSBZSmmotk7yQYsimlwz1z4%3D&reserved=0 > Help: > https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmmfaq.htm&data=02%7C01%7Ck6mr%40outlook.com%7C49b106ac706446bfa01808d52579ef47%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636456127982919553&sdata=T6%2BUqDg%2FyW%2FO8LnqhPzFLa0xFilX1el2FARZlLCCb1M%3D&reserved=0 > Post: mailto:[email protected] > > This list hosted by: > https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net&data=02%7C01%7Ck6mr%40outlook.com%7C49b106ac706446bfa01808d52579ef47%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636456127982919553&sdata=PLu6zrWsfTNzpT2vNFpx7mFmgXpcyGlUdUYR62Q03yM%3D&reserved=0 > Please help support this email list: > https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdonate.html&data=02%7C01%7Ck6mr%40outlook.com%7C49b106ac706446bfa01808d52579ef47%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636456127982919553&sdata=Co6GLMdljMCIIOrGhqkVk%2Bab5GKvk8lc39K%2BlLo7L7Q%3D&reserved=0 > Message delivered to [email protected]<mailto:[email protected]> ______________________________________________________________ Elecraft mailing list Home: https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraft&data=02%7C01%7Ck6mr%40outlook.com%7C49b106ac706446bfa01808d52579ef47%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636456127982919553&sdata=c7JjUZZ1siUZcYfzi0vToSBZSmmotk7yQYsimlwz1z4%3D&reserved=0 Help: https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmmfaq.htm&data=02%7C01%7Ck6mr%40outlook.com%7C49b106ac706446bfa01808d52579ef47%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636456127982919553&sdata=T6%2BUqDg%2FyW%2FO8LnqhPzFLa0xFilX1el2FARZlLCCb1M%3D&reserved=0 Post: mailto:[email protected] This list hosted by: https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net&data=02%7C01%7Ck6mr%40outlook.com%7C49b106ac706446bfa01808d52579ef47%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636456127982919553&sdata=PLu6zrWsfTNzpT2vNFpx7mFmgXpcyGlUdUYR62Q03yM%3D&reserved=0 Please help support this email list: https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdonate.html&data=02%7C01%7Ck6mr%40outlook.com%7C49b106ac706446bfa01808d52579ef47%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636456127982919553&sdata=Co6GLMdljMCIIOrGhqkVk%2Bab5GKvk8lc39K%2BlLo7L7Q%3D&reserved=0 Message delivered to [email protected]<mailto:[email protected]> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
