I would like to be a beta tester. Thanks, Graziano IW2NOY > Il 6 novembre 2017 alle 23.55 Wayne Burdick <n...@elecraft.com> ha scritto: > > > We could use a few volunteers to help test the latest KX3 firmware. Please > email me if you’re interested. > > See release notes below. > > 73, > Wayne > N6KR > > > * * * > > KX3 MCU 2.82 / DSP 1.52, 11-6-2017 > > * SIDETONE VOLUME CAN BE SET LOWER: MON=1 is now about 12 dB lower in volume > than it was originally. MON=50 is about the same as the original maximum. > > * AUTO-OFF TIMER RANGE IS 5 TO 100 MINUTES: Auto-power-off (MENU: AUTO OFF) > allows the radio to turn itself off if no controls are touched for the > specified length of time. (The original range was 3 to 20 minutes.) If auto > power-off is not desired, set the menu parameter to INFINITE (default). > > * VFO A LOCK DISABLES COARSE VFO A TUNING WITH OFS/B CONTROL: This is > intended to prevent accidental frequency changes due to touching the OFS/B > control. As long as VFO A is locked, the offset-tuning feature will also be > locked. (RIT, if used, is still *not* locked. RIT may be needed to fine-tune > received signals even if the VFO itself is locked on a given transmit > frequency.) Note: Coarse tuning steps for VFO A are set up per-mode using > MENU:VFO CRS. The OFS/B control can be used to coarse-tune VFO A if RIT and > XIT are both turned off and the control is not assigned to VFO B (“B” LED). > > * FILTER BANDWIDTH & ULTIMATE ATTENUATION FIX: Filter bandwidth settings > ending in x00 Hz are now increased internally to x50 Hz to ensure excellent > ultimate attenuation (stop band). For example, a setting of 400 Hz becomes > 450 Hz. This is a temporary workaround for a DSP algorithmic issue with the > x00 settings that will be corrected in a future release. Available bandwidth > settings are now 50 Hz, 150 Hz, 250 Hz, 350 Hz, etc. These are entirely > adequate for virtually all operating purposes. > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to grazi...@roccon.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com