If you use K3 remote control commands, either in K-Pod macros or custom
software, you might be interested in the latest field-test firmware release.
We’ve added a “TM” command to set the TX bar graph mode on the LCD. This also
affects what is read in transmit mode by the “BG” command (bar graph read).
The syntax is:
TM0; SWR/RF metering
TM1; CMP/ALC metering
Thanks to the TM command, BG can now read either the power level (with TM0 in
effect) or ALC level (TM1). The latter may be especially useful for remote
installations using FT8 or other audio-based data modes.
Just to recap other remote-control commands added in recent releases:
DEnnn; inserts a processing delay of 10 to 2550 ms (nnn = 001-255),
useful for command pacing, especially in K-Pod macros
ARn; RX antenna on (n=1) or off (n=0)
If you’re interested in testing this field-test release, please email me
directly.
73,
Wayne
N6KR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
