I couldn't take the Line noise & neighbor's RFI any more so I bought one of the new & very pricey NCC-2 phase units from DXE.
I have the TX antenna & a HI-Z 8 element Rx ant & a 3 element Rx. I can use a coax switch to choose between the two Rx antennas but with the K3Ss/K3 with subRx I have the RX in/ant out and the Aux RF input for the SubRx. The manual is pretty straightforward but they don't have a block diagram for something like the K3s with SubRX / Diversity, using the Aux RX jack. DXE has it figured for most radios and I can set up the K3s like that as well, but has anyone using the NCC-2 figured the most effective way to get diversity and also best utilize the NCC-2? If all else fails I can just connect the triangular to the Aux RF jack and use the 8 element for phase adjustment. Using the NCC-2 is new to me. Thanks & 73, Gary KA1J ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
