Please carefully read everything that follows to avoid repetition of the steps followed. What I have summarized here is the result of MANY hours of work and extensive troubleshooting time via email with 2 incredibly helpful and patient hams.
I have an RPi 3 with FLDIGI and WSJT-X installed. After MUCH effort over the past 6 months I have WSJT-X working. My problem now is that the PTT on the FLDIGI does not work. The PTT on the WSJT-X does work. It's underlying rig control is Hamlib. I am using the Elecraft USB to serial adapter connected to the proprietary K2 serial cable. Note that I have successfully used the K2 with a Windows PC running FLDIGI and WSJT-X for some time. I have configured FLDIGI for RigCAT. It communicates with the K2 (frequency, mode, filter selection) but no PTT. I have also tried Hamlib but it will not initialize. During an extensive troubleshooting process over the past 3 weeks with a ham on the Yahoo FLDIGI RPi group I tried FLRIG. It is fully functional with the K2 but when I try using it with FLDIGI nothing works – no frequency control, no PTT, nothing! By this I mean that I am trying to use FLDIGI for the control. I have verified that I have all the correct settings in both FLDIGI and FLRIG with the ham that has been helping me. As a sanity check I installed FLRIG on my Windows machine and successfully ran FLDIGI there. Has anyone had similar issues? Thanks for any help. 73, Jim WA4YWM --- This email has been checked for viruses by AVG. http://www.avg.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
