Jim - For what it’s worth……… I run a KX3 with an RPI3. I have FLDIGI and WSJT-X. I use HAMLIB. I’m also using the same Elecraft USB—>Serial cable. It “used” to work quite well - both could receive/transmit/and control the radio. I use VOX to make the radio squeal. Somewhere along the line, something broke. I have NOT upgraded anything in FLDIGI, but I have gotten the RPI3 to a pretty current version of the OS. WSJT-X continues to work pretty much perfectly. But FLDIGI - not so.
My very uneducated Linux guess is that something in the OS has clobbered FLDIGI’s ability to work nicely with the radio. Unfortunately, my use of FLDIGI was quite infrequent in the past, and when it completely broke, I didn’t spend a whole lot of time working on a solution. Anyway, while our two setups are a bit different, there may be an underlying “thing” in Raspian that has crippled FLDIGI. Should be interesting to see if anyone else has the same issue, and if they’ve found a cure. 73, Jim / W6JHB > On Nov 21, 2017, at 6:54 PM, Elmore's <[email protected]> wrote: > > Please carefully read everything that follows to avoid repetition of the > steps followed. What I have summarized here is the result of MANY hours of > work and extensive troubleshooting time via email with 2 incredibly helpful > and patient hams. > > I have an RPi 3 with FLDIGI and WSJT-X installed. > > After MUCH effort over the past 6 months I have WSJT-X working. My problem > now is that the PTT on the FLDIGI does not work. > > The PTT on the WSJT-X does work. It's underlying rig control is Hamlib. I am > using the Elecraft USB to serial adapter connected to the proprietary K2 > serial cable. > > Note that I have successfully used the K2 with a Windows PC running FLDIGI > and WSJT-X for some time. > > I have configured FLDIGI for RigCAT. It communicates with the K2 (frequency, > mode, filter selection) but no PTT. > > I have also tried Hamlib but it will not initialize. > > During an extensive troubleshooting process over the past 3 weeks with a ham > on the Yahoo FLDIGI RPi group I tried FLRIG. It is fully functional with the > K2 but when I try using it with FLDIGI nothing works – no frequency control, > no PTT, nothing! By this I mean that I am trying to use FLDIGI for the > control. I have verified that I have all the correct settings in both FLDIGI > and FLRIG with the ham that has been helping me. As a sanity check I > installed FLRIG on my Windows machine and successfully ran FLDIGI there. > > Has anyone had similar issues? > > Thanks for any help. > > 73, > Jim WA4YWM > > --- > This email has been checked for viruses by AVG. > http://www.avg.com > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
