Hi Guys,
I built my K3 a couple of years ago complete with second RX. Until now I
have only used the ANT 1 and ANT 2 inputs but thought I would try some
diversity. Having an inv L mainly set for top band and 40m dipole I
thought I might move the 40m dipole to the RX AUX port and listen to the
diversity system.
Now no matter how I play / switch things the RX AUX port sound is dead.
I know the antenna is good because I can plug it into the unused ANT
port and rx on both the INV L and dipole with slightly different
reception. putting the set into diversity holding the SUB button for a
couple of sec shows diversity and the rx goes stereo in the headphones.
What I dont get is the sub channel audio no matter what I do with the RX
ANT switch. Just for completeness I can rx two things one on vfo A and
another on vfo B in contests etc.
Am I doing something wrong or do I have a hardware fault or event a
build issue from the start. I should be able to set with just one
antenna in the RX port and get at least one channel working but this is
a failure. Any suggestions?
73 de Tony G6GLP
---
This email has been checked for viruses by AVG.
http://www.avg.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
