My thoughts too, re best confirmed (or not) by Elecraft. I've got the schematics (filed somewhere) I'll take a look later, see if there is anything "obvious" that might be an issue.
Many thanks & 73. Dave G0WBX. On 27/11/17 17:14, rich hurd WC3T wrote: > According to the KXBC3 manual (last two sentences of Page 2), > > "Only a few microamperes of current are required to keep the clock > running when the KX3 is off. This is supplied by either the external > power supply or the internal batteries." > > By this I take it that if there is a 13V power supply connected and > running, that it feeds the clock; and if not, it's fed by the > batteries. However, this might be confirmed best by Elecraft. > > --- > 72, > Rich Hurd / WC3T / DMR: 3142737 > PA Army MARS, Northampton County RACES, EPA-ARRL Public Information > Officer for Scouting > Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' > W) Grid: *FN20is* ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
