I found that a binder clip (normally used to clip a stack of papers together) works well for that purpose. I have a right angle BNC connector and the MFJ whip. The clip grips the right angle connector and sits vertically on the table.
73 de W0ZF On Mon, Nov 27, 2017 at 11:56 AM Wayne Burdick <[email protected]> wrote: > Rich wrote: > > > Any possibility of offering the anti-rotation bail that is part of the > AX1 kit as a separate item for purchase? > > Rich, > > A very simple but effective anti-rotation device for right-angle-mounted > whips can be made from a piece of rubber tubing or cylindrical extrusion. A > short length can be wedged in between the whip’s loading coil and the right > side of the radio for a compression fit. > > For MFJ18xxT series whips, I use a 3/4” length of 1/2" diameter tubing. > > Wayne > N6KR > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
