Gerald open the manual to the Calibration section and do the Reference
Oscillator calibration - use Method 2 for best results.
The resulting frequency may be different than the original factory
setting (but it should be close).
73,
Don W3FPR
On 11/26/2017 11:36 PM, Gerald Manthey wrote:
​Hello
I am Gerald Manthey and I was trying to set my Freq Calibration because
everyone kept telling me I was off freq.
I tried as I read on the forums with 5000, 10000, 15000 with regular and
alt on CW.
But I think I did something wrong. lol
I went to put it back to factory and 1. Where I wrote it down got thrown
away.
2. changed computer and did not have the recent back up config.
I was wondering if you all kept files on the radio. I realize this is a
long shot, but thought I would try. My K3 is Serial number 6294. I had it
sent in for a K3syn board upgrade.
I was able to find the very original config when the radio was brand new.
Before the upgrades so I loaded it for right now. I had to go change the
filter settings because I added the 6 since it was new.
I had to turn on Tech mode, and I looked at the REF cal it is different
from where I had set it.
Okay just wondering what you would suggest?
Thanks
Gerald Manthey - KC6CNN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
