Just set the SWR thresholds so that it automatically goes into bypass
below whatever mismatch you consider good enough.
Ken K6MR
------ Original Message ------
From: "[email protected]" <[email protected]>
To: [email protected]
Sent: 29-Nov-17 09:25:43
Subject: [Elecraft] KPA1500 Manual?
Except I believe that there is more control of when the KPA1500 tuner
is
used. It would be nice if the KAT500 could be updated so it is only
activated on bands where it is needed.
John KK9A
Don Wilhelm wrote
Tom,
With only minor exceptions, the KPA1500 should respond in the same way
as the KPA500 combined with the KAT500.
73,
Don W3FPR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
