Greetings, I wired my spare Yaesu MD-100 desk mic to my K3 - getting good audio reports. A very nice desk mic.
However, the way this mic is wired, PTT does not break the mic circuit, so it's always hot, regardless of position of PTT switch. My old Shure 444 routed the mic circuit through a pair of contacts on the PTT switch, which was convenient. A switch on the bottom opened PTT to enable VOX. Setting the VOX gain to a suitable level leaves the mic quite sensitive to false transmits from random desk noises, etc. Is there a firmware setting or equivalent that will disable K3 VOX when the PTT circuit is open, and enable VOX when PTT is closed? That would be quite useful. 73 and best regards, Chris - K1AY Punta Gorda, FL -- Life is like Linux - it never stands still. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
