Hi Zac, You can use the K3 Utility program and its Terminal window to show the decoded characters when you have decode turned on. You can operate CW, RTTY (FSK D) and PSK (PSK D). You can define 16 memories for each of the modes by clicking Edit Memories.
Cheers and 73, Fred KE7X For info on all KE7X Elecraft books, see www.ke7x.com. ________________________________ From: [email protected] <[email protected]> on behalf of zachary petersen <[email protected]> Sent: Tuesday, December 5, 2017 11:57 PM To: [email protected] Subject: [Elecraft] VFO B / Decode I have been looking through the options, and the manual however I can't seem to find an option to force VFO B to stay on decode instead of switching back to the frequency. I have been using 0 PWR and the decode to practice CW however since VFO B switches back it makes it difficult to see what I have typed unless I am actively looking at it. Additionally I thought it might be interesting to allow for VFO B knob while on "decode" mode to allow you to scroll back in a conversation ( to a certain buffer limit ). Thank you and I hope to hear if there are any solutions to keep the VFO B on decode, or if this could be a feature that could be added. -- --Zac 858-888-6090 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
