Remember that the receiver is on all the time, as is the low-voltage supply that is powering the receiver. All can cause problems in addition to the fan PWM that the receiver is driving.
Good luck solving this one. There is not much room in the fan enclosure for ferrites to help resolve the issues and adding capacitors at the appropriate places can be a real challenge. I hope returning the controller is still a solution for you even if it means taking the fan down… 73, Jack, W6FB > On Dec 15, 2017, at 4:14 PM, VE3NFK <[email protected]> wrote: > > Hi > > I have a very nice living room ceiling fan "Aeratron 50 in. Indoor Silver 3 > Blade Ceiling Fan" > super high efficiency, very low power and quiet BUT severe radio > interference 15 khz spacing especially on 80, 40, 160 on my K3 and KX3. > > Anybody with any experience with these? They are DC motors, RF ? remote > control units (but it only emits when you use it). > > Thanks! > > 72/3 John VE3NFK > > > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
