Karin; Please elaborate on exactly what you are trying to do and what you are seeing.
The AUXBUS data stream is not a part o the CAT system, and is used only internally for communications between our modules. If you are seeing CAT issues, then I strongly suspect something else is going on. One thing to remember with the K2 is that the AUX I/O connector carries more than just RS-232 signals, and when connecting the radio to the computer these non-RS-232 signals MUST NOT connect to the computer DE-9 connector at all, or very bad things will happen. Jack Brindle, W6FB Elecraft Engineering > On Dec 22, 2017, at 12:44 PM, Karin Johnson <[email protected]> wrote: > > Hello Group: > I am trying to debug an issue I am having with CAT control of an Elecraft K2 > using the WSPR software. > WSPR is setup to use CAT control for turning on the Xmtr. That part works > but I'm seeing some very > Strange bit streams on the AUXBUS during the WSPR control sequence. > I would rather not take up the list with back and forth debugging this > issue. Anyone on the list have > Some knowledge of the AUXBUS protocol that I could communicate with to run > down this issue. > I have posted on the WSPR Yahoo group and the WSPR net site some comments on > this issue. > Regards, Karin K3UU Palm Harbor, FL > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
