Hi Don, Seasons greeting to you.
The problem is only on 40m (7.0mhz) and I suspect band pass filters as
nothing wrong with ANT and the same result into a dummy load. When I
press the tune the display shows 0.0 jumps to 10.0 and straight back to
0. I am suspecting a trip to the hospital is going to be called for.
I am not sure when the factory will be back from holidays but e message
in the queue will be dealt with as and when. I am not in a desperate
hurry so I guess we will work it out. They all deserve holidays.
Thanks for the pointers.
73 de Tony G6GLP
On 25/12/2017 17:38, Don Wilhelm wrote:
Tony,
The SWR of 25 tells me there is a problem with either your antenna or
the ATU. Try it into a dummy load (do an ATU TUNE into the dummy load
first).
If you still get a high SWR with the dummy load, I would contact
Elecraft support for assistance.
73,
Don W3FPR
On 12/25/2017 6:08 AM, Tony G6GLP wrote:
Hi All,
My KX2 seems to be both deaf and mute on 40m. 80m is alive and well
as are other bands. The KX2 is pre loved (I hope) and is fitted with
the atu and clock. Any suggestions on where to start. I tried moving
the antenna plug but no difference.
When I press the atu button it displays 25-1 all through the tune.
No RF comes out at any point. 40m is the band I wanted to use but
thats a bust for now till it is fixed.
---
This email has been checked for viruses by AVG.
http://www.avg.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
