To the list, others may have set up this way:
In my memory channels, the 5 60 meter channels are set up for channel
hopping, with VFO A being the center of the channel and CW, and VFO B
being the lower edge of the channel [carrier position], and USB.
Selecting a channel then lets me switch between CW and USB with the A/B
switch.
Changing the VFO A steps through the 5 channels. However, it does not
seem to take VFO B with it. VFO B remains on the first channel selected.
I set the memories up with the K3 Freq Memory editor. Am I doing
something wrong, or is this how it works. If the latter ... any chance
it could be set to take VFO B along with a rotation of VFO A?
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 1/4/2018 1:09 PM, Don Wilhelm wrote:
For Channel Hopping or Live Scan, you store the channels in memory
with an "*" label as you have done. Then you do a memory recall for
one of those channels. The KX3 will go to that channel. Use the VFO
knob to hop from one channel to the next.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
