Have you been operating the K3S using CAT control from an application or
logging program? I've found when terminating some programs or the
computer or radio, during the shut down sequence, things change.
Otherwise, values are not as you normally use them or as you left them
the previous night.
I always first close the application, turn off the radio, turn off the
power supply, and shut down the computer. My start up procedure is just
the opposite. Computer on, power supply on, radio on, open the
application.
73
Bob, K4TAX
On 1/7/2018 1:29 PM, Mal Speer wrote:
I strange thing happened to my K3s this morning. Both the mic gain and
compression were set to 0. After trying to get into a net, and not being
heard, I discovered the problem. I did not touch any settings from the last
time I used the rig, which was yesterday afternoon.
Has anyone had this problem?
Mal WA2TWA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
