Chapter 5 of Fred Cady's Macro Programming, has some of these plus methods of macro testing. I used some of the content to program mine.There's plenty of references, e.g., setting a frequency is on pages 115-116, etc.
73, Bill K9YEQ -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Don Wilhelm Sent: Monday, January 8, 2018 6:33 AM To: Eric Rosenberg <[email protected]>; elecraft@mailman qth. net <[email protected]> Subject: Re: [Elecraft] K-Pod and/or K3 programmig? Eric, Some of those functions are already present in the K3/K3S - read the *entire* manual including the chart of menu functions to see more things that you can do. - jump up/down x kHz, see VFO OFS - increase/decrease step of tuning encoder, see VFO CRS - switch to a different band, see "Quick Memories" - I have not used the BAND+ BAND- switches in a long time, band switching is a quick two button tap. 73, Don W3FPR On 1/8/2018 5:59 AM, Eric Rosenberg wrote: > I'm interest in macros or ?? (alternative key assignments) to enable simple > tasks I've been accustomed to with other radios. > > The ones that immediately come to mind are > - jump up or down X Khz (2 buttons) > - increase/decrease (or reset to the default) step of the tuning encoder > - switch directly to a specific band instead of having to scroll through them > to get where you want to go (6 buttons). > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
