Thanks. I'll try it tomorrow.
- Paul
At 10:24 PM 1/8/2018, Jack Brindle wrote:
As Cliff notes, that is what the SERIAL setting
is designed for. If you do this, set RADIO to
SERIAL, the RS232 X setting for the radioâs
data rate, and then set SER POLL to OFF.
Setting SER POLL to ON will allow you to use the
radio and KPA without the computer.
Remember, the KPA is listening to the data
coming FROM the radio. Also, when SER POLL is
ON, the KPA expects to talk on the serial port
to the radio. It is disconnected from the data
line going to the radio when SER POLL is OFF so
as not to interfere with the computer.
If you run into any problems, just ask!
- Jack, W6FB
> On Jan 8, 2018, at 9:55 PM, Cliff Frescura <[email protected]> wrote:
>
> Yes, you can make a "sniffer" that sends data to the KPA500 from the radio.
>
> This is exactly how I used my KPA500 with my TS-940.
>
> 73,
>
> Cliff K3LL/6
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Paul Baldock
> Sent: Monday, January 08, 2018 6:23 PM
> To: [email protected]
> Subject: [Elecraft] Connecting RS232 to TS-2000 and a PC and a KPA500
>
> Is it possible to connect a PC to the RS232 of the Kenwood TS-2000 and then
> T of the same cable to send just the data (and gnd) from the
> TS-2000 to the KPA-500. The logging program on the PC would do the polling
> of the TS-2000.
>
> Thanks
>
> - Paul KW7Y
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to [email protected]
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
