Ahh, that’s it! Dick
Sent from my iPhone > On Jan 9, 2018, at 09:33, Paul Baldock <[email protected]> wrote: > > I changed the Baud rate from 9600 to 38400 and now the POWER button works to > turn the amp on and off. > > - Paul > > > > > I am running KPA500 remote program. I am connected via RS232. > > If the KPA500 is ON (at the back and at the front) then I can HOST and > CONNECT to the KPA500 and control all functions. When I press the POWER > button on the KPA500 remote program the KPA500 correctly turns off. However, > when I press the remote POWER button again the KPA500 does not turn back on. > It seems that the KPA500 RS232 port is not active when the KP500 is not ON. > Is this correct? If so how do I turn the power on remotely from the PC? > > Thanks > > - Paul > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
