Thank you very much Alan. This will be perfect. Michael Blake [email protected]
> On Jan 19, 2018, at 14:53, Alan <[email protected]> wrote: > >> On 01/19/2018 11:31 AM, Michael Blake wrote: >> >> 2. If the SDR is connected to the buffered IF Out jack what will >> the level of the 8215 kHz IF output be? > This is for the K3. The K3S has a different preamp setup so the numbers > should be scaled accordingly. > > With the preamp off, the gain from the K3 antenna to the IF output is > approximately -6 to -7 dB, depending on band and on the particular K3. With > preamp on, the gain from antenna to IF out is approximately +4 to +5 dB. > > That assumes it is not an older K3 that has not had the IF output > modification performed. In that case, subtract about 10 dB from both gain > figures. > > Alan N1AL > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
