John,
It may be a matter of choice, but I think having a live microphone when
operating in digital modes is not a good thing. I would turn MIC+LIN
off - the MIC SEL to LINE IN for DATA modes.
The only application where I would use MIC+LINE is if I wanted to use a
software application in voice modes to transmit audio files from the PC
as well as from the microphone.
In other words, for Soundcard DATA modes, set MIC SEL to LINE. It is
mode dependent. When MIC SEL is set to LINE, the MIC+LIN is turned to
off automatically.
You *are* running in DATA A mode, are you not? If not, change to DATA A
- compression and RX and TX EQ is set flat, that leaves your SSB
settings "as is" and you do not have to change them when switching
between voice and data. All other aspects of DATA A are like SSB.
73,
Don W3FPR
On 1/21/2018 3:57 PM, John wrote:
Ok now thanks to Bill and Jane Ferry.
"Mic+lin " was off.
Thanks again.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
