You forgot to read the firmware release notes:
MCU 5.10 / DSP 2.83, 2-2-2015
* EASIER DIVERSITY RECEIVE SELECTION: A regular hold of SUB now goes
directly into diversity receive, without first having to go through
"LINK". This should benefit most users of the KRX3 sub receiver, since
few use the VFO linking function. Those who do use VFO linking can still
turn it on by setting CONFIG:VFO LNK to ON. This menu entry can be
assigned to a programmable function switch for easy selection if
desired, eliminating the need to bring up the menu.
Ken K6MR
On 23-Jan-18 18:01:24, "VE3NFK" <[email protected]> wrote:
Hi
Must be having a senior moment - but while I have VFO A and B linked
nicely on 80 - can't do it on 40..
instructions say
"Holding SUB links the VFOs (whether the sub
receiver is on or off). The kHz decimal point of
VFO B flashes as a reminder. "
But the instant you press 'SUB' - it turns on without linking; and then
any
further 'hold' turns on diversity.
What am I doing wrong?
Thanks John VE3NFK
--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
