look for the SMA connector next to the BNC antenna connector.
That will tell you if the KX3 has a 4M or 2M module. Opening it
up is quite easy, as it is the way you change the internal
batteries, so that works too. If the installer checked the 2M or
4M box on the transverter, you get a clue as to which band was installed.
73 Bill AE6JV
On 2/6/18 at 12:58 PM, [email protected] (Michael Goins) wrote:
Is their an easy way to tell if a KX3 has the 2 meter module in it without
opening it up?
Mike, k6wmg
-----------------------------------------------------------------------
Bill Frantz | When an old person dies, a | Periwinkle
(408)356-8506 | library burns. - Joe McGawon | 16345
Englewood Ave
www.pwpconsult.com | Irish Ethnographer | Los Gatos,
CA 95032
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
