What is your callsign? I do not have the USB interface however I do have a lot of other MicroHAM devices. Since I do not see the word Router in your post I have to ask this again: Are you following the MicroHAM setup instructions?
John KK9A gbconsultin...@gmail.com Wrote" I am still trying to get a K3 talking. I have a connection through a Microham USB III Interface box that connects the K3 RS232 port to my PC running Win 7 64 Pro. The path is from the K3 to the Microham III USB interface, then there is a straight USB connection from the Microham to the PC. I have downloaded the K3 Utility and tried to see if it will establish connection with the PC but it will not. COM port 1 is used. The K3 setting is currently at 38400 baud but I also tried setting the K3 baud rate at 4800 and doing a power on/off but with the same results. I see the K3 utility screen on the PC step through the various baud rates but it will not sync up to the K3. The PC recognizes the Microham USB interface when looking at the Win 7 Device Manager but it indicates there is no device driver. I don¹t always trust what the PC says though. Can someone point me to a device driver I can download and install. My K3 FW is Rev 5.38. 73¹s Greg Greg Best P.E. 16100 Outlook Avenue Stilwell, KS 66085 816-792-2913 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com