Thanks guys. That is very fast response. I have as a result of these suggestions, updated to the newest revision of the firmware. I had thought that the radio was giving me information through the tones, but I couldn't find it.
I turned off the SW TONE, and that will probably do it. I will see on my next activation of a summit. Thank you each of you for the help. Rich Day KK4DZE On Mon, Feb 19, 2018 at 5:24 PM, Don Wilhelm <[email protected]> wrote: > Richard, > > Check the SW TONE menu If you have it set to CODE nn (where nn is WPM), > then you will get that morse when you push a button - it is a nice feature > for sight impaired amatuers. > > That can also be turned on by Holding the AFP/AN button while turning the > KX2 on. > > 73, > Don W3FPR > > > On 2/19/2018 1:53 PM, Richard Day wrote: > >> On my last two SOTA activations, my KX2 appears to be working valiantly. >> At some point, however, I find that I cannot push any button without it >> giving me a short CW message. >> >> -- Richard N. Day 828-606-6922 <(828)%20606-6922> Cell ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
