Systems haven’t used two stop bits for decades. I’ve never set a system to two 
stop bits and I was supporting a big UUCP node at Hewlett-Packard in the late 
1980’s.

wunder
Walter Underwood
wun...@wunderwood.org
http://observer.wunderwood.org/  (my blog)

> On Feb 23, 2018, at 9:58 AM, RIchard Williams via Elecraft 
> <elecraft@mailman.qth.net> wrote:
> 
> When setting up radio settings in WSJT-X for the K3/K3S, I keep seeing 
> different settings for the number of stop bits (one and two) popping up on 
> the reflector.    Am not sure where TWO stop bits is coming from???  On page 
> 20 of the K3S manual (page 18 of the K3 manual), left hand column, Serial 
> Port Setup,  it states "Software should be set up at the same rate: 8 data 
> bits, no parity, 1 stop bit".
> Have no idea why the Radio set window in WSJT-X defaults to TWO stop bits 
> when you select Elecraft K3/K3S.   Initially, I did not catch this, and I was 
> encountering problems with my K3S remaining in transmit mode more often than 
> not after a transmission.  Once I changed to ONE stop bit, my problem 
> magically went away.
> 
> What I have set up is:
> Rig: Elecraft K3/K3S , Polling interval: 1sec
> CAT control: COM 13 (which is a virtual com port set up with LP-Bridge with 
> my setup, your setting will be whatever com port are using).
> Baud rate: 38,400
> Data Bits, Stop Bits, and Handshake:  8, none, 1.
> PTT method: CAT
> Mode: Data/Pkt
> Split Operation:  Rig
> 
> DIck, K8ZTT
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wun...@wunderwood.org

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to