Touching is like you take the radio in to your hands, put it upside down on the table, removing the back pannel, or just like pushing buttons on the radio, or like taking a pen and slightly bumping on the chassis. I have tried to turn the mic's gain down to 0, but it didn't help. Linas LY2H
On 2018 vas. 26, pr at 02:09 John Hiatt <[email protected]> wrote: > > How hard are you touching it? I am wondering if it could be the internal > microphone picking it up. > > > John, KC7DRI > > ------------------------------ > *From:* [email protected] <[email protected]> > on behalf of Irma & Linas(LY2H) <[email protected]> > *Sent:* Sunday, February 25, 2018 1:03 PM > *To:* [email protected] > *Subject:* [Elecraft] KX2 echo in the speaker > > Hello group, > > I have a bizzair effect in my KX2. When I touch the chassis of the radio > each touch corresponds with the echo in the speaker. The radio is not > connected to the antenna, could run on the battery or the PS, the effect is > there. Touching also makes the Smeter bar move a bit. > Does anybody has/had the same issue and know the solution? > > Thanks , Linas LY2H > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
