Hi Jim,
Since MSK144 has a bandwidth about 10 times the size of JT65A, I expect that any KX3
calibrated with the temperature compensation routine
(http://www.elecraft.com/manual/KX3%20Custom%20VFO%20TC%20rev%20A9.pdf) should work
OK. As you know, KX3 units with number above about 10,000 have the new main RF board,
and should be quite stable even for narrower weak signal modes as long as the
temperature compensation routine is done correctly.
My early KX3 is number 800 something, so it has the original RF board, and there was
a big problem with resistors heating up during transmit which caused the nearby
oscillator to change frequency suddenly. Five years ago, I had hoped that adding big
heat sinks and coupling the oscillator to those would make the KX3 stable enough for
JT65A on 6m for EME. Although it helped, the ultimate solution was to remove the two
problem resistors from the RF board, and replace them with a single tiny flange mount
20w resistor (AVX100) mounted directly to the case/heat sink, and coupling the
temperature sensing IC more closely to the oscillator. The stability now rivals my
K3 with the optional high stability oscillator.
Full details of the modifications are shown on my web page here:
http://www.bigskyspaces.com/w7gj/KX3HeatSinks.htm
My current objective in improving the stability was to be able to use the KX3 in FT8
mode for SOTA activations. I now feel very confident that the KX3 is stable enough
for that, or for other weak signal modes such as JT65A even up on 6m.
GL and VY 73, Lance
On 2/27/2018 05:33, Jim Brown [email protected] [wsjtgroup] wrote:
I'm part of a team planning for a summer assault on CM79 (6M operation).
It's a challenging hike -- 3 miles +1,000 ft elevation, and all the guys
going up the trail are in their mid-70s. Previous trips have been CW
only with a KX3 and the 100W amp. Our objective is to fill grids for
FFMA and VUCC chasers. Our most satisfying QSO last year was with ND0B,
who I think needs only one more for FFMA. One of the guys going up the
trail will be K6EU, a very experienced WSJT op. I'll be pilot. There are
a lot of guys trying to work us within MS and tropo range that we
couldn't hear on CW.
W7GJ has identified frequency stability issues with that rig, and
implemented fixes. Elecraft has also redesigned the main board to
correct the issues that Lance found, eliminating the need for much of
what Lance developed, and I'm corresponding with Wayne Burdick, Elecraft
owner and chief engineer about it.
My question is simple -- what target do we need to hit? How much short
term drift can each of these modes tolerate before decoding is degraded?
I'm guessing wider for MSK144.
Thanks and 73, Jim K9YC
------------------------------------
Posted by: Jim Brown <[email protected]>
------------------------------------
To unsubscribe, send an email to:
[email protected]
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/wsjtgroup/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/wsjtgroup/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
--
Lance Collister, W7GJ(ex WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8, E51SIX, 3D2LR,
5W0GJ, E6M, TX5K, KH8/W7GJ, V6M, T8GJ, VK9CGJ, VK9XGJ)
P.O. Box 73
Frenchtown, MT 59834-0073
USA
TEL: (406) 626-5728
QTH: DN27ub
URL: http://www.bigskyspaces.com/w7gj
Skype: lanceW7GJ
2m DXCC #11/6m DXCC #815
Interested in 6m EME? Ask me about subscribing to the Magic Band EME
email group, or just fill in the request box at the bottom of my web
page (above)!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
