I use the sub on diversity and dual monitoring. I have my front panel knobs set to adjust levels between the two receivers. If using diversity, then B Set is required to set the correct antenna as the wrong antenna can create low volume. You might want to review your settings and possibly go back to originals if you have saved them when you first backed up. You can always come back to current. I save regularly regardless, as I do mess up settings when going through the menus. Perhaps an aging issue. :-)
73, Bill K9YEQ -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Thomas Doligalski Sent: Tuesday, February 27, 2018 6:47 PM To: Scott <[email protected]> Cc: [email protected] Subject: Re: [Elecraft] K3s Low sub receiver volume They are the same. Tom, W4KX Sent from my iPad > On Feb 27, 2018, at 7:40 PM, Scott <[email protected]> wrote: > > Check NR and ATT are the same on both main and subrx. > > Scott > AD5HS > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
