Ken,
A slight correction - the K2 does NOT need the K60XV option for
transverter operation, although it makes things easier.
The XV50 can be driven by any transceiver that produces 1mW up to 8
watts. The jumpers in the XV50 must be set properly to control the
power input range.
73,
Don W3FPR
On 3/2/2018 10:12 AM, Ken Jones wrote:
Hi All,
Have the subject transverter I'm not using. Works well. No scratches, dents or
dings.
Comes with the original manual and the three connecting cables for the K2.
For the K2 you need the K60XV option.
The "builder alert" bypass cap change has been done and the sheets included.
The XV "Manual Errata", Rev B-1 has been incorporated and the sheets included.
Will be packed well. Did lots of E-Bay packing.
Asking 140.00 + 15.00 shipping (US only).
Pay-Pal is fine or a postal Money Order.
Thanks for reading, Ken, W2GIW, Sewell, NJ
OK in QRZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
