Phil,
There is no "cookbook" that I am aware of.
BUT - FT8 is no different than any other digital mode, although the
application software may be a bit different.
Connect the soundcard input to the headphone jack and the soundcard
output to the MIC input. Connect the KXUSB cable to the computer.
Use DATA A mode (not SSB).
If you are completely new to digital modes, you might try PSK31 first
using FLdigi or Ham Radio Deluxe to get used to it.
One last IMPORTANT point - Elecraft radios are different than other
manufacturers transceivers. Much of the internet advice (and some
software instructions) will tell you to set the power high and use the
audio level to control the power. That does NOT work with Elecraft
radios. You must first set the audio to produce 4 bars with the 5th bar
flashing on the ALC meter. Leave it set there and control the power
with the power knob.
See the article on my website www.w3fpr.com - scroll down to the bottom
of the left column and click on the link.
73,
Don W3FPR
On 3/3/2018 7:12 AM, Philip Alley wrote:
Is there a complete “cookbook” for running FT8 with the KX3+PX3 and a MacBook
Pro (w OSX 10.13.3)? I am running MacLogger DX and have ordered a Sabrent
USB-C tiny sound card. The WSJT-X is downloaded but not set up yet. My KX3 is
already communicating with Maclogger DX via USB.
I am unsure about the additional cabling I need and best strategy for rig
control.
Any suggestions from anyone who has been down this road will be greatly
appreciated.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
