Tim,
I suspect no one knows the answer because it has not been tested.
If you can find a 2 to 3 foot long TRRS plug to TRRS jack cable
(extension cable), it should be easy enough to give it a try. If it
works, then it works.
If you have problems, be prepared to remove that extension to see if it
is the problem.
This is not an official Elecraft answer, I am just indicating that there
is an easy way to try the extension.
73,
Don W3FPR
On 3/9/2018 8:20 AM, Tim N9PUZ wrote:
I have a KX2/KPXA-100 combination. I'd like to be able to physically
separate the two more than the factory supplied cables will allow. Any
problems with adding a 2 or 3 foot extension to the KX2ACBL data/control
cable that runs between the two?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
