Eric,
Are you kidding? Yes, the K2 can receive 630 meters with a suitable
transverter, but it would have to have an input/output frequency at 14
MHz or above.
The K3 with the new synthesizers and the upgrades to the KBPF3 can tune
down to that band, as can the K3S with the KBPF3 option.
You can use the transverter output with the K3/K3S in TX TEST mode to
provide a 1mW signal to an amplifier for those low frequency bands, or
you can use an external transverter.
I don't know of any plans to produce a low band transverter from Elecraft.
73,
Don W3FPR
On 3/14/2018 6:59 PM, eric norris via Elecraft wrote:
After reading the Elecraft Application Note on this, I'm wondering if there has
been discussion at Elecraft of producing an XV.472 (sic) transverter?
Imagine, a fella could even operate 630m from his K2.
Elecraft could be first on the block with true 630m integration.
Instead of throwing a wire into a tree, we could throw a 29-ft slinky into a
tree. Mouth-watering.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
