Martin DD4UKP schrieb:
Hello,
I have what looks like an easy question but I can't find the answer. I'm
the happy owner of K2/100 5346 that works great (except a low power
problem on 17 m with only 9w and 10m with 9w).
I would like to put to KPA100 in a EC2 enclosure together with the
KAT100 witch is my next project. If my understanding is good I need to
order the KAT100-2 and the KIO2 so that booth units can "talk" together.
What I'm am not shure about is if I need to also buy a EC2 enclosure. I
have the TOP with the KPA100, the bottom with the KAT100-2 so all I seem
to need and the two side panels. Do they come with the KAT100-2 or do I
have to order them ?
Hi Martin!
First: Depending on your mechanical/electrical skills, you dont need
either the KIO2 nor an EC2. - Yes, all what you would need from an extra
EC2 would be the two side panels, the tilt standup, the feet. AND the
2D-fasteners! -Stingy as I am, I ordered my KAT100-2 without an EC2 and
build it myself from 1.5mm aluminium from my local supplier, the
fasteners were made from an 6x6mm u-shaped brass profile and the paint
was mixed at 'Bauhaus' - 1/4 gallon, enough to paint homemade EC2s for
the rest of my life;-). But, if i would have thought before about the
time needed - i *would* have ordered the EC2!!
KIO2: Well, if you could manage to get the needed signals from the
controlboard to your external amp/tuner, no KIO would be needed. But you
should look for an shielded calble if you won't risk to get spurious
emissions from the control logic into your receiver. And, if you also
can get the ttl-Interfacesignals to the KPA you would also profit from
the build-in RS232 inside the KPA.
- The philosophy why the elecraft guys probably won't recommend this is
just that if you have an extra KIO inside your K2 you can use it
independent from your external KPA/KAT.
My own approach is quite similar to yours: K2 with no KIO and KAT100 in
(selfmade) EC2 whitch will also be housing for a later planned KPA100.
For me, serial I/O will just be needed when I am at home, not for field
use, so I dont need the KIO2.
--
Gruss! & 73 de Rolf Dohmen, DL1KJ - K2#5426
Dohmen EDV&Telekommunikation * Dammstr.13 * 50259 Pulheim
Tel:02238/9638-96 Fax:-99 Mobil:0172/2719098 mailto:[EMAIL PROTECTED]
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
