John, There is a phone jack on the adapter that will ACCEPT an external PTT switch (A footswitch is commonly used).
If you have nothing that you can use for a PTT switch, you can always use a key or paddles - just close the dot paddle in SSB mode and the K2 will go into transmit. 73, Don W3FPR > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of John Wiener > Sent: Thursday, May 04, 2006 5:04 PM > To: [email protected] > Subject: [Elecraft] Another potentially embarrassing question > > > I just got the Proset-K2 headset. I put in all the jumpers on the > mic header, placed the resistor between pins 1 and 6 of the mic socket. > > I have yet to do final Alignment. Will this arrangement mess up the > alignment procedures? > > Also, > The "Test and Set-up" refers to a PTT button on the Proset-K2. > Here's the embarrassing part: I can't find the button. > There is no manual that shows details of the headset. > > Any help appreciated. > > John > AB8WH > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 5/3/2006 > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
