Just to clarify, for CW and data modes (including RTTY/FSK), you can use: - external PC + keyboard (either with a terminal program or using KX3/KX2 Utility)
- external keyer paddle - attached keyer paddle (KXPD2/KXPD3) 73, Wayne N6KR > On Mar 19, 2018, at 5:05 PM, Don Wilhelm <[email protected]> wrote: > > Noel, > > The KX3 does not have an FSK input. You will have to move up to the K3S to > have that. > > You cannot use a CW Keyer (external) for FSK - you must use paddles directly > attached to the internal keyer in the KX3. > > The easiest way is to use AFSK A data submode along with a soundcard and a > computer. > > If you have a computer application that can send ASCII text (via the "KY" > commands (see the programmers reference manual), then you can send in FSK D > mode. > > Despite what is often said about soundcard generated AFSK, in the K3/K3S, it > is actually cleaner than FSK. I figure that is also true of the KX3, > although I do not have any data on that. > > 73, > Don W3FPR > > On 3/19/2018 7:12 PM, NOEL POULIN wrote: >> Hello, >> I was reading the KX3 manual, and I do not see how to hook an FSK interface >> to the KX3,. >> I want to use it in RTTY (FSK) and I am looking where should I connect the >> interface. >> I do not want t o use a cw keyer to for rtty.... > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
