On Wed, Mar 21, 2018 at 9:31 AM, Jim Brown <[email protected]> wrote:
> Another hint for those with moderate hearing loss. Turn off your aids and > set RXEQ for maximum boost on the top bands, maximum cut on the lower > bands. Several years ago, I recommended this to a friend with a lot of > loss, and he uses it successfully to work CW. > Here is what I do with good success. For CW, I maximize RX EQ for my sidetone frequency. In my case, Sidetone is 800 Hz. RX EQ is 0 db for all bands except Band 5 (800 Hz) which I set at +16 dB. I just had my hearing aids adjusted. I asked for one program to bandpass at 800 Hz. Still evaluating if that is going to help. > On 3/21/2018 8:15 AM, Don Wilhelm wrote: > >> I have hearing aids, and find I cannot use the CM500 without removing the >> aids - they cause howls. >> My hearing aids are over the ear type as yours are. >> > I have no howl or feedback issues with over-the-ear hearing aids and cans. Different people have different results. 73, Hank, W6SX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
