Dick,
Check out the 4O3A antenna genius. There's a 2x8 and a 1x8 version.
You can control the switch's via one of three methods:
- LAN - There's a Windows app to control the switch or a Flex
transceiver can control it over the network
- Point to point so you can use an 8 position switch
- BCD
The above options are selected via a dip switch mounted in the switch
itself.
Rich - N5ZC
On 3/28/2018 3:21 PM, Dick via Elecraft wrote:
Since the KPA only has 2 Antenna jacks, I'd love to see Elecraft offer 1x8 and 2x8
Remote Antenna Switches with band data interface, if needed, so they arrive tested
and ready to work with the K3. In the meantime, can anyone share which 1x8 or 2x8
Remote Antenna Switches and band data interface your using with your K3 and how
time consuming it was to get the Antenna Switch configured? Thanks & 73, Dick-
K9OM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
