Hi Ian First, make sure that CONFIG: TECH MD is set to On. You won't ever need to change that again.
Got to CONFIG: DDS FRQ. If the display shows 3.58something, then you have the older KSYN3. If the display shows - - - - then it's a KSYN3A (which doesn't have a DDS). 73 from Ian GM3SEK >-----Original Message----- >From: [email protected] [mailto:elecraft- >[email protected]] On Behalf Of G8KQW >Sent: 31 March 2018 09:27 >To: [email protected] >Subject: [Elecraft] KSYN3A check > >Hi,I've purchased a used K3 serial # < 8800, is there a way to check >whether >a KSYN3A is installed from the Menu system to save taking the cover >off?// >Ian > > > >-- >Sent from: http://elecraft.365791.n2.nabble.com/ >__________________________________________________________ >____ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html >Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
