I certainly agree with Joe on this point. I hear many voice /
background noise signals in the "CW" portions of the bands. Furthermore,
fact is, it isn't legal to transmit such.
suppose if one wishes to run Slow Scan TV with audio in the SSB
portion of the band it might be justified. Otherwise, I still say it is
a terrible idea.
73
Bob, K4TAX
On 3/31/2018 11:21 AM, [email protected] wrote:
Message: 20
Date: Fri, 30 Mar 2018 17:02:30 -0400
From: "Joe Subich, W4TV"<[email protected]>
To:[email protected]
Subject: Re: [Elecraft] Re K3 Audio
Message-ID:<[email protected]>
Content-Type: text/plain; charset=utf-8; format=flowed
> I need both at the same time, Mike for voice and Line in for digital.
This is absolutely a terrible idea. I doubt that your shack is silent
while working data modes and any noise - you talking, someone else
yelling at your, a TV/radio/computer running in the background, or even
fan noise will be picked up by the open mic.
That said ...
Does any one know the command for both Mike in Front Panel and Line
in rear panel?
Assuming you will be using USB*with CMP set to zero*, set MENU:MIC SEL
as needed for your mic and MENU:MIC+LIN = ON.
Note: you will first need to set MENU:MIC SEL=LINE and adjust the mic
gain/sound card output for four to five bars of ALC. This sets the Line
IN gain. Then switch to MENU:MIC SEL as needed for your mic (FP.h or
FP.L) and again adjust the mic gain for ALC peaking between 5 to 7 bars.
Now you can select MENU:MIC+LINE and set it to ON to enable both inputs.
Adjusting the mic gain with MENU:MIC+LINE = ON will adjust*ONLY* the
mic gain for the*MICROPHONE* input, in order to change the Line In
(digital) level, you will need to adjust the sound card output*or*
change MENU:MIC SEL to LINE before adjusting the mic gain.
73,
... Joe, W4TV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
