Many desktops of recent vintage don’t truly go ‘off’ at shutdown. There are mobo elements still powered (by the p/s), including USB.
To reset a ‘stuck bit’ the power cord must be unplugged then wait a time period until the caps STILL holding power deplete (a LED on my Asus board goes out and a soft relay click is heard). Only then does the USB reset and starts to function normally at boot up. My current station setup is not ideal, the USB is the weak link under QRO HF. I’m in the process of building a better quality station. Rick WA6NHC Smell Czech correction happen > On Apr 28, 2018, at 9:41 AM, Mark E. Musick <[email protected]> wrote: > > > Don suggested rebooting the PC to clear the USB port. You indicate you have > done that with no success. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
