Hi folks, I am new to Elecraft. I received my KX3 kit and built it yesterday. Was very careful to follow all the directions and warnings. Now completed, the receiver seems to work great, but having trouble with transmit.
In any mode, any band, any PTT request (key, mic PTT, etc), I instantly get four errors: TXS TXN TXO and TXR. I have enabled the tuner in the menu, but if I hit the tuning button, it says no tuner (while in the menu, flipping through all the L and C combos, I hear the ATU relays clicking). Suspecting the tuner, I removed it, turned it off in the menu and plugged the BNC directly into the RF board. I still get the same 4 errors. I saved my settings and did an EEINIT. Didn't help. I've written to Elecraft support and suspect I'll hear back next week, but I thought I'd ask here in case anyone had any pointers for me on what I might check while I was around this weekend. Many thanks. 73 James KI0KN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
