I'm an infrequent user of data modes. I'm trying to use FT8 with the
latest version of the WSJT-X software. Sound card input is via LINE IN.
I'm using DATA A mode.
Everything works OK on transmit except that intermittently the K3 output
falls to zero even though the sound card audio output level isn't
changing. The VOX stays on, so the K3 is "hearing" the audio. ALC
usually but not always falls to zero from the 4 bars level. Even
weirder, if I turn the MIC gain (LINE) down to zero and back up again
the output and ALC come back up to normal.
Is this a hardware fault? A software fault? Or something even weirder?
My FW REVS says
uC 05.14
d1 02.83
d2 00.00 (no KRX3 is installed)
FL 01.19
dr 00.00
73. Alan G3XAQ
--
Alan Ibbetson
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
