John,
The amp is bypassed if the KAT500 needs do do any tuning or switching,
so I suspect the amp will not fault.
That is why you run the keying line first to the KAT500 and then from
the KAT500 to the KPA500, so the tuner can disable the amp.
73,
Don W3FPR
On 5/10/2018 9:31 AM, [email protected] wrote:
I concur that the RF sense works very well, at least it does with an
external antenna switch and reasonably good antenna SWR. I am not sure
what happens if you also use the KAT500 as an antenna switch or your
untuned SWR is very bad. Does the amp fault during this first dit?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
