Thanks for the reply. Please note that I have no issue with high SWR faults. I have seen several FAULT 09 REFL HI events and they were all caused by an operator antenna switching error. PA DISS (FAULT 11) is not an SWR fault although it appears it can be induced by a load mismatch.
73, Andy k3wyc ________________________________ From: Michael Blake <[email protected]> Sent: Monday, May 28, 2018 6:10 AM To: ANDY DURBIN Cc: [email protected] Subject: Re: [Elecraft] PA DISS fault and relationship to SWR Andy, I have seen this too. My remote tuner will sometimes quit with SWR in the 1.4 : 1 range. Sometimes it causes a KPA500 SWR Fault and sometimes not. My GUESS is that it depends on whether the impedance is <50 ohms or >50 ohms. The SWR does not tell you which. Michael Blake [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
